Posts Tagged As: Fall Prevention

Blog Post #126 – Fall Protection – Section 26.5 and 26.6 of the Construction Regulation 213/91- Fifth in Series

Section 26, subsection 5 states, “A guardrail system shall be capable of resisting anywhere along the length of the system the following loads when applied separately, without exceeding the allowable unit stress of each material used: 1. A point load of 675 newtons applied in a lateral direction to the top rail; 2. A point … Continue Reading

Blog Post #122 – Fall Protection – Section 26.3 of the Construction Regulation 213/91- Third in Series

Since section 26.3 is very extensive, I will break up the description into two or three separate blogs to cover all the information and for my interpretations of the law.

Section 26.3 (1) states,

“Despite paragraph 1 of section 26, a guardrail system that meets the requirements of this section shall be used if a worker has access to the perimeter or an open side of any of the following work surfaces and is exposed to a fall of 2.4 metres or more:

Continue Reading