Excerpt from the Government of Ontario’s ‘Newsroom’
Vaughn-based Martinrea Fabco Metallic Canada Inc. was fined $75,000 way back on March 23, 2010 for a violation under the OHSA after a worker was injured.
On June 24, 2008, a Martinrea worker was assigned to repair a die used for stamping car parts. The worker lowered the die, which weighed over 17,000 kilograms, on two sets of 10X10 centimetre composite plastic blocks with an overhead crane. The blocks were stacked one on top of the other in a designated repair area of the plant. As the worker started to fix the die, it shifted on the blocks and pinned the worker between the die and the guardrail. The worker suffered leg and pelvic injuries.
A MOL investigation found that the blocks were not a uniform length and did not span the full width of the worker.
Martinrea pleaded guilty under the ACT for failing as an employer to ensure that the die was placed on the blocks in a way that did not endanger the safety of the worker.
The court also imposed a 25% victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.
My opinion
The law(s) in contravention:
Martinrea was found guilty of a contravention of the Ontario ‘Industrial Establishments’ sector regulation, section 45, subsection (a) which states,
“Material, articles or things,
(a) required to be lifted, carried or moved, shall be lifted, carried or moved in such a way and with such precautions and safeguards, including protective clothing, guards or other precautions as will ensure that the lifting, carrying or moving of the material, articles or things does not endanger the safety of any worker.”
The Act is clear on this matter. Section 25 clearly defines examples of responsibilities of employers.
Section 1(d) states,
1) They shall ensure the equipment, materials, and protective devices provided are used as prescribed;
Section 2(a) states,
2) An employer shall provide information, instruction, and supervision to a worker to protect the health and safety of the worker; and
Section 2(h) states,
3) An employer shall take every precaution reasonable in the circumstances for the protection of the worker.
The equipment or materials were obviously not up to the standards needed to do the job. The second case fault shows that the operator either did not receive the proper training or received none what so ever. The CSA standard, B167-08, ‘Overhead Travelling Cranes’ discusses the design, inspection, testing, maintenance, and safe operation of jib cranes, gantry cranes, half gantry cranes, overhead cranes, bridge cranes, almost every type except tower cranes and mobile cranes. Those two types are covered by separate CSA standards and training. (Tower cranes are covered by CSA Z248-04 which was renewed 2009) (mobile cranes are covered by Z150-98 which was renewed 2008, Safety codes on mobile cranes)
The MOL might have asked these few questions, “If crane training was provided, did it meet the standard and “ how long ago was it given” and “was there a refresher?” “Was there a proper practical evaluation completed on site, which covers the visual inspection of the crane, the operation of the crane as well as a planned lift.
There is language in the standard that allows the employer OR the governing body (MOL) to determine the time between training sessions. One only has to contact the MOL current hotline at 1-877-202-0008. I did a few years ago and the MOL expects the training to have a refresher every 3 years.
In the past, I have contacted this number for numerous issues. As a health and safety trainer, I come across many questions provided by students that need answers. Some are scenario-driven but most are obscure enough that I need to look to the experts at the Ministry of Labour for help. They have never let me down yet. They have been courteous and patient in our dealings and I would recommend them to anyone.
You may also be fortunate to have a local list of current MOL inspectors. These people would rather you ‘pick their brains’ now and again and fix your current problems on your own than to have them come in on official business and clean up the mess.
In closing, my position here shows one of three faults:
1) The training was inadequate;
2) The supervisor may or may not have been trained covered by section 25 and/or section 27 (1a) or (2c); and
3) Inadequate supervision.
When it comes to lifting objects overhead, crane training is a must. In fact, the Ontario government totally agrees and makes crane training part of the Millwright apprenticeship. I am a firm believer in training and proper training in this matter would have gone a long wayto have prevented this incident from happening.
HRS Group Inc. has a great team that can help you with all your health and safety needs including material handling and overhead and pendant crane training. Contact Deborah toll free at 1-877-907-7744 or locally at 705-749-1259.
Remember — In Ontario, “ALL Accidents are Preventable”
‘Work’ and ‘Play’ safe.
Daniel L. Beal
CHSEP – Foundation Level
VP & Senior Trainer
HRS Group Inc.
Kudos just for making the effort go over this particular topic.
excellent blog!
Kudos to you! I hadn’t thought of that!
That is nice to definitely find a site where the blogger knows what they are talking about.
I have really enjoyed reading your well written article. It looks like you spend a lot of effort and time on your blog. I have bookmarked it and I am looking forward to reading new articles. Keep up the good work!
Very interesting entry, I look forward to the next! Thx for share
Excellent work. I normally do not respond but had to for this post.
Thank you.
Your blog is brilliant I will have to read it all, thank you.
Very well done.
Its late here and I wanted to go to bed but I had to read one more article from your blogs. Good night!
Good points all around. Truly appreciated.
You’re the one with the brains here. I’m watching for your posts.
The content of the post is very interesting and exciting. I learned a lot from here.
Good point. I hadn’t thought about it quite that way.
Hi I love this post and it was so fabulous and I am gonna save it. One thing to say the Superb analysis this article has is trully remarkable.No one goes that extra mile these days? Well Done!! Just one more suggestion you should install a ‘Translator’ application for your Worldwide Readers …
Hi I love this comment and it is so informational and I am gonna save it. One thing to say the analysis you have done is trully remarkable. Who goes that extra mile these days! Bravo :) Just one more suggestion you should install a ‘Translator’ application for your Worldwide Audience !!!
I appreciate seeing webs that understand the worth of providing a prime useful resource. This helps to make this website worth coming back to for even more info.
Hey great post. Have you ever thought about writing full time? I am a writer, too.
Hello!, First time poster and looking forward to being a part of the group!
Thanks so much for this web site! I have not been this thrilled by a text for a long period of time! You have got it, whatever that means in blogging. Anyway, you’re certainly someone that has something to say that people should hear. Keep up the great work. Keep on inspiring the people!
At last, someone comes up with the “right” answer!
Its always cool to arrive at a site like yours that has this type of topics to read about. Thoroughly enjoyed and will definitely be returning often.
Hey – nice blog, just looking around some blogs, seems a pretty nice platform you are using. I’m currently using WordPress for a few of my sites but looking to change one of them over to a platform similar to yours as a trial run.
Great Post. I was searching for some info on this subject and I am glad I came across your blog. I like the way you have expressed the facts so effortlessly. It would have been good if you had some more pictures to share.
If my problem was a Death Star, this article is a photon torpedo.
Thanks, I guess!
This information is is as good as it gets.
Cool information!