Excerpt from the Government of Ontario’s ‘Newsroom’
Waterloo North Hydro Inc., an electricity distributor for Waterloo and the surrounding area, was fined $110,000 for a violation of the Occupational Health and Safety Act after a worker was injured.
On October 12, 2010, a mall was under construction in Waterloo. Workers from Waterloo North Hydro Inc. had installed transformers on site and were attempting to send power from a transformer in one location to a transformer in another location. As power was sent to the second transformer, a worker for an electrical contractor was in the area routing a metal tape through a duct. The tape came into contact with a newly energized electrical conductor and caused an arc flash. The worker was badly burned.
A Ministry of Labour investigation found that an adequate job plan for energizing the transformers had not been documented. A job plan would have identified all known hazards and implemented controls for each hazard to protect workers from injury.
Waterloo North Hydro Inc. pleaded guilty to failing to establish and implement an adequate job plan prior to installing and energizing the transformers.
The fine was imposed by Justice of the Peace Ruth Legate Exon. In addition to the fine, the court imposed a 25-per-cent victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.
My opinion
The law(s) in contravention:
Waterloo North Hydro Inc. was found guilty of violating section 181, sub-section 1 of the Ontario ‘Construction’ regulation 213/91 which states,
“Except where otherwise required by this Regulation, electrical work performed on or near electrical transmission or distribution systems shall be performed in accordance with the document entitled “Electrical Utility Safety Rules” published by the Electrical and Utilities Safety Association of Ontario Incorporated.”
Waterloo North Hydro Inc. was also found guilty of violating section 23, sub-section 1(a) which states,
“constructor shall ensure, on a project undertaken by the constructor that,
(a) the measures and procedures prescribed by this Act and the regulations are carried out on the project.”
Why was there no set of safe operating procedures? Why was there not an adequate job plan for energizing the transformers and why was there no discussion about the work at hand? You see, all hazards have to be identified, assessed and controlled before any work is done.
It would sure be a safer workplace if all employers followed these guidelines, now wouldn’t it!
Remember – In Ontario, “ALL Accidents are Preventable”
HRS Group Inc. has a great team that can help you with all your health and safety needs including ‘Electrical Safety Awareness’, ‘Arc Flash Safety Awareness’ and ‘Lockout and Tagout’. Contact Deborah toll free at 1-877-907-7744 or locally at 705-749-1259.
‘Work’ and ‘Play’ safe.
Daniel L. Beal
CHSEP – Foundation Level
VP & Senior Trainer
HRS Group Inc.
It’s like you read my mind! You seem to understand a lot about this.
Good for you!
Do you have any video of that? I’d like to find out some additional information.
I wanted to thank you for all the great information you are providing!
Hi my friend! I want to say that this post is amazing!
What information!
It’s awesome to pay a quick visit to this site!
Wow, wonderful weblog format!
That is a good tip especially to those new to the blogging!
Oh my goodness! Amazing article dude!
I am really impressed with your writing skills!
Great posting!
It’s my first visit at this website!
Here every one is sharing knowledge!
One of your best!
This is a topic that’s near to my heart… Many thanks!
Superb, what a weblog it is!
I love reading a post that will make people think.
Its like you read my mind!
I wanted to thank you for all the great information you are providing!