Excerpt from the Government of Ontario’s ‘Newsroom’
Waterloo North Hydro Inc., an electricity distributor for Waterloo and the surrounding area, was fined $110,000 for a violation of the Occupational Health and Safety Act after a worker was injured.
On October 12, 2010, a mall was under construction in Waterloo. Workers from Waterloo North Hydro Inc. had installed transformers on site and were attempting to send power from a transformer in one location to a transformer in another location. As power was sent to the second transformer, a worker for an electrical contractor was in the area routing a metal tape through a duct. The tape came into contact with a newly energized electrical conductor and caused an arc flash. The worker was badly burned.
A Ministry of Labour investigation found that an adequate job plan for energizing the transformers had not been documented. A job plan would have identified all known hazards and implemented controls for each hazard to protect workers from injury.
Waterloo North Hydro Inc. pleaded guilty to failing to establish and implement an adequate job plan prior to installing and energizing the transformers.
The fine was imposed by Justice of the Peace Ruth Legate Exon. In addition to the fine, the court imposed a 25-per-cent victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.
My opinion
The law(s) in contravention:
Waterloo North Hydro Inc. was found guilty of violating section 181, sub-section 1 of the Ontario ‘Construction’ regulation 213/91 which states,
“Except where otherwise required by this Regulation, electrical work performed on or near electrical transmission or distribution systems shall be performed in accordance with the document entitled “Electrical Utility Safety Rules” published by the Electrical and Utilities Safety Association of Ontario Incorporated.”
Waterloo North Hydro Inc. was also found guilty of violating section 23, sub-section 1(a) which states,
“constructor shall ensure, on a project undertaken by the constructor that,
(a) the measures and procedures prescribed by this Act and the regulations are carried out on the project.”
Why was there no set of safe operating procedures? Why was there not an adequate job plan for energizing the transformers and why was there no discussion about the work at hand? You see, all hazards have to be identified, assessed and controlled before any work is done.
It would sure be a safer workplace if all employers followed these guidelines, now wouldn’t it!
Remember – In Ontario, “ALL Accidents are Preventable”
HRS Group Inc. has a great team that can help you with all your health and safety needs including ‘Electrical Safety Awareness’, ‘Arc Flash Safety Awareness’ and ‘Lockout and Tagout’. Contact Deborah toll free at 1-877-907-7744 or locally at 705-749-1259.
‘Work’ and ‘Play’ safe.
Daniel L. Beal
CHSEP – Foundation Level
VP & Senior Trainer
HRS Group Inc.
Many thanks!
Good info. Lucky me I found your website!
Generally I do not read article on blogs, however I would like to say that this write-up very pressured me to try and do so!
Hello my friend! I want to say that this post is awesome and nicely written.
Greetings! Very useful advice in this particular post!
Good day! I know this is kinda off topic but I was wondering which blog platform are you using for this website?
This is a topic which is close to my heart… Cheers!
Hey just wanted to give you a quick heads up and let you know a few of the images aren’t loading correctly.
You are so good at this!
Very well written!
This article is actually a nice one.
Good for you!
This was an incredibly nice post.
I do not know if it’s just me or if everybody else encountering issues with your website.
Next time I read a blog, Hopefully it is as inspiring as this one is!
This was a really good post.
Hello there, I think your web site could be having internet browser compatibility problems.
Its like you read my thoughts!
This blog is Relevant!!
Thanks for sharing your thoughts!