Excerpt from the Government of Ontario’s ‘Newsroom’
Waterloo North Hydro Inc., an electricity distributor for Waterloo and the surrounding area, was fined $110,000 for a violation of the Occupational Health and Safety Act after a worker was injured.
On October 12, 2010, a mall was under construction in Waterloo. Workers from Waterloo North Hydro Inc. had installed transformers on site and were attempting to send power from a transformer in one location to a transformer in another location. As power was sent to the second transformer, a worker for an electrical contractor was in the area routing a metal tape through a duct. The tape came into contact with a newly energized electrical conductor and caused an arc flash. The worker was badly burned.
A Ministry of Labour investigation found that an adequate job plan for energizing the transformers had not been documented. A job plan would have identified all known hazards and implemented controls for each hazard to protect workers from injury.
Waterloo North Hydro Inc. pleaded guilty to failing to establish and implement an adequate job plan prior to installing and energizing the transformers.
The fine was imposed by Justice of the Peace Ruth Legate Exon. In addition to the fine, the court imposed a 25-per-cent victim fine surcharge, as required by the Provincial Offences Act. The surcharge is credited to a special provincial government fund to assist victims of crime.
My opinion
The law(s) in contravention:
Waterloo North Hydro Inc. was found guilty of violating section 181, sub-section 1 of the Ontario ‘Construction’ regulation 213/91 which states,
“Except where otherwise required by this Regulation, electrical work performed on or near electrical transmission or distribution systems shall be performed in accordance with the document entitled “Electrical Utility Safety Rules” published by the Electrical and Utilities Safety Association of Ontario Incorporated.”
Waterloo North Hydro Inc. was also found guilty of violating section 23, sub-section 1(a) which states,
“constructor shall ensure, on a project undertaken by the constructor that,
(a) the measures and procedures prescribed by this Act and the regulations are carried out on the project.”
Why was there no set of safe operating procedures? Why was there not an adequate job plan for energizing the transformers and why was there no discussion about the work at hand? You see, all hazards have to be identified, assessed and controlled before any work is done.
It would sure be a safer workplace if all employers followed these guidelines, now wouldn’t it!
Remember – In Ontario, “ALL Accidents are Preventable”
HRS Group Inc. has a great team that can help you with all your health and safety needs including ‘Electrical Safety Awareness’, ‘Arc Flash Safety Awareness’ and ‘Lockout and Tagout’. Contact Deborah toll free at 1-877-907-7744 or locally at 705-749-1259.
‘Work’ and ‘Play’ safe.
Daniel L. Beal
CHSEP – Foundation Level
VP & Senior Trainer
HRS Group Inc.
God Bless you man. Have a nice day. Bye
I am really enjoying the theme/design of your blog.
Thank you for another informative web site.
Thanks for sharing your info.
I wanted to thank you for all the great information you are providing!
It’s going to the best I have read today!
You really understand the issue!
Keep this going please, great job!
Greetings from Los Angeles! I’m bored to tears at work so I decided to check out your website on my I-phone during lunch break. I enjoy the information you present here and can’t wait to take a look when I get home.
If you wish to take much from this article then you have to apply such methods to your own website.
I was more than happy to find this web site.
If you are going for best contents then come here more often!
These are good articles!
This web site really has all the info I needed about health and safety!
I love what you guys are usually up to.
My spouse and I stumbled over here from a different web page and thought I might as well check things out.
I like what I see so now I’m following you.
Can I simply just say what a comfort to find someone who really understands what they are talking about on the web.
Hi this is kinda of off topic but I was wanting to know if blogs use WYSIWYG editors or if you have to manually code with HTML.
I’m not sure why but this weblog is loading very slow for me.
Wow! Finally I got a webpage from where I be capable of actually take helpful facts concerning my study and knowledge.